This Modification is intended for those who wish to replace their G25/G27's standard 270mm steering wheels with a larger racing wheel of choice.

Steering wheel adapters are available at the following links:
<G25> <G27>

Installation for both G25 and G27 are very similar, please refer to each wheel's respective page for installation video.

Tools Needed:

- Allen wrenchs (Hex key)

Instructions:

1. Remove all six screws located at the center of the wheel with an Allen wrench, keep these screws as you will need to reuse them later.

2. Remove the center and tilt the steering wheel foward. Be careful as there are two connectors still attached, disconnect them.

2.5 (G27 only) Place the included rubber o-ring over shift-light window, this will hold it fimly in place and prevent it from rattling.

3. Attach the adapter by re-using the six Allen screws removed earlier.

4. Attach your steering wheel of choise using included tapered Allen screws, tighten with criss cross (star) pattern.

5. That's it! Depending on the size/weight if your racing wheel,
you might need to increase in-game force feedback to compensate for the increased diameter.

Happy racing!

Disclaimer:

The Modification on this page are only a suggestion. Reader who wishes to peform such modification to their gaming wheels are doing so at their (your) own will and must understand the risk. I cannot be held responsible for any possible damage or injuries.